Upon request, we can also offer assembled cables, connectors and suitable feedthroughs into your vacuum chamber. Please find below our program of vacuum acessories on this page. If you have any further questions do not hesitate to contact us via email.

miCos can supply typical range of feedthroughs, crimp pins, crimp tools and Kapton insulated wire. Internal vacuum compatible connectors are available in two versions: ceramic for UHV and Special Low Vapour Polymer for high vacuum. D-type Feedthroughs are recommended for electrical measurement, signals, heaters up to amps as well as thermocouple connections. Internal and external connections have locking screws which are important for safety and ease of demountability. Particularly suited for the manufacturing of CE compliant equipment. The connectors and sockets are industry standards and can be used with a wide range of connectors available from electronic components suppliers.

Vacuum Stepper Motors for Extreme Environment. The VSS series of Vacuum stepper motors are designed to be used inside vacuum chambers. This eliminates the use of motion feed throughs that generate particulates. Since the stepper motor is relatively simple in design, it can be adapted to operate in extremephysical environments with a few modifications. Under normal conditions, only the bearings are subject to wear. For extreme environment applications, spezial windings, bearings and lubricants are used, as well as special insulating material and spezial adhesive. To accomodate most extreme environmental conditions, Vacuum VSS stepper motors are provided in different grades. Each grade covers a vacuum rating, a temperature range and a radiation level. Assembly, cleaning and conditioning of the Vacuum VSS stepper motors results in a low outgassing rate which makes Vacuum the reliable choice for all the extreme environment applications.